Finned heat exchanger bundle

Packed internally polished fittings ready for shipment. The internal rugosity is maximum 0,3mµ

Opened packing of an internally polished T-piece of 32” SCH10. The internal rugosity is maximum 0,3mµ

Internally polished seamless pipe of 16’’ x 28,5mm min. wall. The internal rugosity is maximum 1,0mµ

Internally polished welded elbow of 24” SCH40S in 304L. The internal rugosity is maximum 0,3mµ

Checking the rugosity with Mitutoyo

Seamless tube on roll / coiled tubing in 316L 1/4'' O.D. x .076''

Smls pipes of 6’’ and 10’’ in monel 400 (UNS N04400)

Smls pipes of 18’’ SCH10S in superduplex S32760

Under water ultrasonic testing of 14’’ pipes

Smls pipes of 24’’ SCH XS in 304H with 3.2 third party inspection by Lloyd’s Register

Smls pipe of 16’’ x 21,44mm in 316/316L

Seamless heat exchanger tubes in 304H

Smls heat exchanger tubes with max. length of 16,8m with special sea freight transport

Seamless pipes in 316L of 8’’, 10’’ and 12’’SCH STD

Seamless heat exchanger tubes in duplex S31803 (ASTM/ASME A/SA789)

Seamless pipes of 2’’ in heat resistant stainless steel 310 in different fixed lengths

Smls pipes of 16’’ x 28,5 min. wall with 3.2 inspection by DNV Marine

Welded sanitary pipe DIN11850 BC154,0 x 2,0 in 1.4404 for export to Argentina

Welded heat exchanger pipes ASTM A249 25,4 x 1,24 in 316/316L

Pipes EN10217-7 TC1 DIN EN ISO1127 D3/T3 of 21,3x1,6 till 609,6 x 4 in 1.4571 (316Ti)

Welded WX pipes ASTM A312 of 14'' SCH STD in 310S produced in 7 days and than shipped with air freight to Dubai

Welded pipes DIN17457 TC2 / EN10217-7 TC2 DIN EN ISO1127 D3/T3 of 88,9x2 and 812,8 x5mm in 1.4404

Welded pipes ASTM A358 class 1 in 904L with 100% X-ray of the weld as per norm and with special WPS/PQR requirements as per client’s specification

Welded WX pipe ASTM A312 24'' SCH STD in 321H with intergranular corrosion test (ASTM A262 E) and grain size test (ASTM E112)

Seamless fittings ASTM B366 of 4'' till 8'' in incoloy 825(UNS N08825)

Welded WX elbows ASTM A403 60'' SCH STD in 316L

Sanitary butterfly valves, sanitary ball valves unions

Welded WX T-pieces and reducers ASTM A403 36'' SCH STD in duplex S31803

Welded WX stub ends MSS-SP43 type A (short type) 14'' and 18'' SCH10S in 316/316L

Welded WX elbow 45° and 90° LR of DN900 till DN1600 as per DIN2605-1 and DIN2605-2 in 1.4307

Seated valves (Sitzventile) and control valves (Regelventile) for sanitary applications

Seamless elbow 90° LR ASTM/ASME A/SA403 20'' SCH STD in 347H

Welded WX elbow 90° LR ASTM A403, ASME B16.9 48'' SCH20 in 321/321H

Welded WX elbow 90° LR ASTM/ASME A/SA403 64'' SCH XS in 304/304L

Welded WX T-piece of 36'' SCH STD in 304/304L with special WPS/PQR and impact test at -196°C

Internally polished fittings till 32'' with internal rugosity of max. 0,3mµ packed for shipment

Seamless elbow 180° LR ASTM A403 8'' and 5'' SCH XS in 317L

Welded WX bends 90° R=508mm ASTM A403 8'' SCH40S in 316L

Seamless elbow ASTM A335 24'' x 50,8mm in P92

Welded WX elbow DIN2605-2 DN400 till DN1600 in 1.4307

Sanitary butterfly valves, sanitary ball valves and unions

Seamless elbow 180° SR ASTM A403 ASME B16.28 8'' SCH160 in superduplex S32760 with ferrite check 100% ultrasonic testing and 100% dye penetrant testing

Seamless and welded WX fittings in DIN in 1.4307 (304L) and 1.4404 (316L) with EN10204/3.2 inspection and ferrite max. 3% on the weld

Welded WX T-piece of 16’’ SCH120(30,96mm) in 321H

Forged long welding neck flanges in superduplex S32760 (1.4501)

Forged valve bodies in WB36 and rings in 316L

Forged pipes in 1.4435 (316LMo)

Forged petroleum drilling rings in 20SiMn2MoVA

Forged wide electrical axis in 34CrNiMo6

Forged pipe for power station in F11 P11), F22 (P22), F91 (P91) and F92 (P92)

Forged rings in 317L (1.4438)

Long welding neck flanges of 4’’ in 347H (1.4550)

Lap joint flange of 34’’ in P92

Forged nozzle as per drawing in 254SMO (1.4547)

Forged pressure vessel pipe in 316Ti (1.4571)

Forged bushes in 904L (1.4539)

Galvanised flanges ASTMA105N of 14’’ till 24’’

Forged rings with diam 2400mm in 316L

Forged flanges of DN400 in 1.4878 (321H) with 3.2 certificate

Forged lateral T-pieces and heavy duty forged flanges

Forged pipe pieces of 20’’ s=35mm in 304H

Flanges DIN2629 PN320 DN200 in 1.4404

Forged lateral T-piece of 24’’ in duplex F51

Flanges till 28’’ in 316L with dye penetrant testing

Flange ASTM B564 as per drawing DN800 in UNS N08810 (incoloy 800H).

Flange ASTM A182 ASME B16.47 serie B 300 lbs RTJ 44'' in 347H.

Seamless pipe ASTM A312, ASME B36.19 36’’ SCH10 (914,4 x 7,92mm) in 316Ti (1.4571).

Welded WX T-piece of 16’’ SCH120(30,96mm) in 321H with impact test at -196°C (41J), 100% ultrasonic and 100% dye penetrant and EN10204/3.2 inspection (delivery time : 3 weeks with air freight).

Forged pipe / forged bushes as per ASTM A182 in 347.

Forged valve bodies in P92 and WB36.

Welded pipes ASTM A358 class 1 in 904L with special WPS/PQR requirements as per client’s specification.

Seamless and welded WX fittings in DIN in 1.4307 (304L) and 1.4404 (316L) with EN10204/3.2 inspection and ferrite max. 3% on the weld.

Forged nozzle ASTM B564 as per drawing in inconel UNS N06600.

Packing can be in prefumigated boxes as per IPCC

Ultrasonic testing on 24’’ 150 lbs blind flange

Intergranular corrosion testing

Dye penetrant investigation on 36’’ 300 lbs RTJ blind flanges

Microscopic examination (200 x enlarged) on duplex 1.4462 pipes

Tensile testing

Sharpy impact testing

IQI on X-Ray films

Flattening test on test piece of 24’’ seamless pipe

Ultrasonic testing of seamless pipes

Ultrasonic wall thickness measurement

Special heat treatment (stabilizing heat treatment) on elbows of 24” SCH XXS in 321H

PMI results Niton hand gun

PMI with Niton hand gun

PMI with Spectro

introducing

Responsive Design

Responsive web design is a web design approach aimed at crafting sites to provide an optimal viewing experience—easy reading and navigation with a minimum of resizing, panning, and scrolling—across a wide range of devices (from desktop computer monitors to mobile phones)

Jonathan Doe

Web Developer / Pexeto

Aenean vitae metus justo. Duis luctus dui nec condimentum suscipit. Maecenas tempor arcu in ipsum aliquam, vel porttitor odio dictum. Nullam porttitor eget lorem nec imperdiet. Mauris ultricies purus risus, ac viverra risus vulputate nec.

Collaborate with Your Team

Etiam eget lectus nec eros dignissim auctor

Donec et lectus tincidunt, facilisis sem nec, aliquam mauris. Nam dapibus mauris sit amet adipiscing luctus. Morbi convallis, purus eu congue placerat, nunc purus sodales elit, id consectetur magna lacus in augue. Aliquam leo est, convallis quis quam at, dapibus dictum mauris. Nam rhoncus enim massa, non ornare nibh sagittis vitae.

Reasons To Choose This Theme

Ut sit amet blandit arcu. Aenean vestibulum mi quis est ultrices vehicula. Quisque pellentesque augue ante, eget placerat odio adipiscing sed. Nulla adipiscing dapibus adipiscing. Suspendisse purus sapien, luctus pulvinar felis in, condimentum dapibus eros. Sed eget sem fermentum, lobortis massa sed, elementum nisi. Donec adipiscing aliquam nibh, et ultrices nunc pellentesque sed. Quisque pellentesque augue ante, eget placerat odio adipiscing sed Curabitur tristique orci vitae tellus imperdiet lobortis. Aliquam elementum nunc a tempus ultricies. Nam condimentum lacinia tortor, id fringilla elit mattis non. Curabitur tristique orci vitae tellus imperdiet lobortis. Ut sit amet blandit arcu. Aenean vestibulum mi quis est ultrices vehicula. Quisque pellentesque augue ante

  • Finned heat exchanger bundle

  • Packed internally polished fittings ready for shipment. The internal rugosity is maximum 0,3mµ

  • Opened packing of an internally polished T-piece of 32” SCH10. The internal rugosity is maximum 0,3mµ

  • Internally polished seamless pipe of 16’’ x 28,5mm min. wall. The internal rugosity is maximum 1,0mµ

  • Internally polished welded elbow of 24” SCH40S in 304L. The internal rugosity is maximum 0,3mµ

  • Checking the rugosity with Mitutoyo

  • Seamless tube on roll / coiled tubing in 316L 1/4'' O.D. x .076''

  • Smls pipes of 6’’ and 10’’ in monel 400 (UNS N04400)

  • Smls pipes of 18’’ SCH10S in superduplex S32760

  • Under water ultrasonic testing of 14’’ pipes

  • Smls pipes of 24’’ SCH XS in 304H with 3.2 third party inspection by Lloyd’s Register

  • Smls pipe of 16’’ x 21,44mm in 316/316L

  • Seamless heat exchanger tubes in 304H

  • Smls heat exchanger tubes with max. length of 16,8m with special sea freight transport

  • Seamless pipes in 316L of 8’’, 10’’ and 12’’SCH STD

  • Seamless heat exchanger tubes in duplex S31803 (ASTM/ASME A/SA789)

  • Seamless pipes of 2’’ in heat resistant stainless steel 310 in different fixed lengths

  • Smls pipes of 16’’ x 28,5 min. wall with 3.2 inspection by DNV Marine

  • Welded sanitary pipe DIN11850 BC154,0 x 2,0 in 1.4404 for export to Argentina

  • Welded heat exchanger pipes ASTM A249 25,4 x 1,24 in 316/316L

  • Pipes EN10217-7 TC1 DIN EN ISO1127 D3/T3 of 21,3x1,6 till 609,6 x 4 in 1.4571 (316Ti)

  • Welded WX pipes ASTM A312 of 14'' SCH STD in 310S produced in 7 days and than shipped with air freight to Dubai

  • Welded pipes DIN17457 TC2 / EN10217-7 TC2 DIN EN ISO1127 D3/T3 of 88,9x2 and 812,8 x5mm in 1.4404

  • Welded pipes ASTM A358 class 1 in 904L with 100% X-ray of the weld as per norm and with special WPS/PQR requirements as per client’s specification

  • Welded WX pipe ASTM A312 24'' SCH STD in 321H with intergranular corrosion test (ASTM A262 E) and grain size test (ASTM E112)

  • Seamless fittings ASTM B366 of 4'' till 8'' in incoloy 825(UNS N08825)

  • Welded WX elbows ASTM A403 60'' SCH STD in 316L

  • Sanitary butterfly valves, sanitary ball valves unions

  • Welded WX T-pieces and reducers ASTM A403 36'' SCH STD in duplex S31803

  • Welded WX stub ends MSS-SP43 type A (short type) 14'' and 18'' SCH10S in 316/316L

  • Welded WX elbow 45° and 90° LR of DN900 till DN1600 as per DIN2605-1 and DIN2605-2 in 1.4307

  • Seated valves (Sitzventile) and control valves (Regelventile) for sanitary applications

  • Seamless elbow 90° LR ASTM/ASME A/SA403 20'' SCH STD in 347H

  • Welded WX elbow 90° LR ASTM A403, ASME B16.9 48'' SCH20 in 321/321H

  • Welded WX elbow 90° LR ASTM/ASME A/SA403 64'' SCH XS in 304/304L

  • Welded WX T-piece of 36'' SCH STD in 304/304L with special WPS/PQR and impact test at -196°C

  • Internally polished fittings till 32'' with internal rugosity of max. 0,3mµ packed for shipment

  • Seamless elbow 180° LR ASTM A403 8'' and 5'' SCH XS in 317L

  • Welded WX bends 90° R=508mm ASTM A403 8'' SCH40S in 316L

  • Seamless elbow ASTM A335 24'' x 50,8mm in P92

  • Welded WX elbow DIN2605-2 DN400 till DN1600 in 1.4307

  • Sanitary butterfly valves, sanitary ball valves and unions

  • Seamless elbow 180° SR ASTM A403 ASME B16.28 8'' SCH160 in superduplex S32760 with ferrite check 100% ultrasonic testing and 100% dye penetrant testing

  • Seamless and welded WX fittings in DIN in 1.4307 (304L) and 1.4404 (316L) with EN10204/3.2 inspection and ferrite max. 3% on the weld

  • Welded WX T-piece of 16’’ SCH120(30,96mm) in 321H

  • Forged long welding neck flanges in superduplex S32760 (1.4501)

  • Forged valve bodies in WB36 and rings in 316L

  • Forged pipes in 1.4435 (316LMo)

  • Forged petroleum drilling rings in 20SiMn2MoVA

  • Forged wide electrical axis in 34CrNiMo6

  • Forged pipe for power station in F11 P11), F22 (P22), F91 (P91) and F92 (P92)

  • Forged rings in 317L (1.4438)

  • Long welding neck flanges of 4’’ in 347H (1.4550)

  • Lap joint flange of 34’’ in P92

  • Forged nozzle as per drawing in 254SMO (1.4547)

  • Forged pressure vessel pipe in 316Ti (1.4571)

  • Forged bushes in 904L (1.4539)

  • Galvanised flanges ASTMA105N of 14’’ till 24’’

  • Forged rings with diam 2400mm in 316L

  • Forged flanges of DN400 in 1.4878 (321H) with 3.2 certificate

  • Forged lateral T-pieces and heavy duty forged flanges

  • Forged pipe pieces of 20’’ s=35mm in 304H

  • Flanges DIN2629 PN320 DN200 in 1.4404

  • Forged lateral T-piece of 24’’ in duplex F51

  • Flanges till 28’’ in 316L with dye penetrant testing

  • Flange ASTM B564 as per drawing DN800 in UNS N08810 (incoloy 800H).

  • Flange ASTM A182 ASME B16.47 serie B 300 lbs RTJ 44'' in 347H.

  • Seamless pipe ASTM A312, ASME B36.19 36’’ SCH10 (914,4 x 7,92mm) in 316Ti (1.4571).

  • Welded WX T-piece of 16’’ SCH120(30,96mm) in 321H with impact test at -196°C (41J), 100% ultrasonic and 100% dye penetrant and EN10204/3.2 inspection (delivery time : 3 weeks with air freight).

  • Forged pipe / forged bushes as per ASTM A182 in 347.

  • Forged valve bodies in P92 and WB36.

  • Welded pipes ASTM A358 class 1 in 904L with special WPS/PQR requirements as per client’s specification.

  • Seamless and welded WX fittings in DIN in 1.4307 (304L) and 1.4404 (316L) with EN10204/3.2 inspection and ferrite max. 3% on the weld.

  • Forged nozzle ASTM B564 as per drawing in inconel UNS N06600.

  • Packing can be in prefumigated boxes as per IPCC

  • Ultrasonic testing on 24’’ 150 lbs blind flange

  • Intergranular corrosion testing

  • Dye penetrant investigation on 36’’ 300 lbs RTJ blind flanges

  • Microscopic examination (200 x enlarged) on duplex 1.4462 pipes

  • Tensile testing

  • Sharpy impact testing

  • IQI on X-Ray films

  • Flattening test on test piece of 24’’ seamless pipe

  • Ultrasonic testing of seamless pipes

  • Ultrasonic wall thickness measurement

  • Special heat treatment (stabilizing heat treatment) on elbows of 24” SCH XXS in 321H

  • PMI results Niton hand gun

  • PMI with Niton hand gun

  • PMI with Spectro

Showcase Your Work

Etiam fringilla condimentum enim, eget pretium erat scelerisque vitae. Integer id luctus turpis, convallis semper ipsum. In fermentum lacus eu justo interdum, dignissim feugiat quam aliquam. Quisque a fermentum diam. Mauris eros libero, consectetur sed tempus eu, vehicula eget sem.

Recent Projects

Aenean Ultricies

Design / Photography

Quick Gallery - Masonry

Other

Pellentesque Feugiat

Design / People

Viverra in Porttitor

Illustration / People

Pellentesque Lectus

Design / Illustration

Placerat Consequat

People / Photography

Nam Nunc Sapien

Design / People

Aliquam Fringilla

Design / People

Forester

Logos

Faucibus Vitae

Illustration / Photography

Praesent gravida

Design / Illustration

Fringilla Posuere Libero

People / Photography

Meet The Team

Nullam ut consectetur dolor. Sed sit amet iaculis nisi. Mauris elementum non felis et blandit. Vestibulum iaculis quam nec diam sagittis cursus. Nunc quis aliquam erat, et eleifend orci

Finned heat exchanger bundle

Packed internally polished fittings ready for shipment. The internal rugosity is maximum 0,3mµ

Opened packing of an internally polished T-piece of 32” SCH10. The internal rugosity is maximum 0,3mµ

Internally polished seamless pipe of 16’’ x 28,5mm min. wall. The internal rugosity is maximum 1,0mµ

Internally polished welded elbow of 24” SCH40S in 304L. The internal rugosity is maximum 0,3mµ

Checking the rugosity with Mitutoyo

Seamless tube on roll / coiled tubing in 316L 1/4'' O.D. x .076''

Smls pipes of 6’’ and 10’’ in monel 400 (UNS N04400)

Smls pipes of 18’’ SCH10S in superduplex S32760

Under water ultrasonic testing of 14’’ pipes

Smls pipes of 24’’ SCH XS in 304H with 3.2 third party inspection by Lloyd’s Register

Smls pipe of 16’’ x 21,44mm in 316/316L

Seamless heat exchanger tubes in 304H

Smls heat exchanger tubes with max. length of 16,8m with special sea freight transport

Seamless pipes in 316L of 8’’, 10’’ and 12’’SCH STD

Seamless heat exchanger tubes in duplex S31803 (ASTM/ASME A/SA789)

Seamless pipes of 2’’ in heat resistant stainless steel 310 in different fixed lengths

Smls pipes of 16’’ x 28,5 min. wall with 3.2 inspection by DNV Marine

Welded sanitary pipe DIN11850 BC154,0 x 2,0 in 1.4404 for export to Argentina

Welded heat exchanger pipes ASTM A249 25,4 x 1,24 in 316/316L

Pipes EN10217-7 TC1 DIN EN ISO1127 D3/T3 of 21,3x1,6 till 609,6 x 4 in 1.4571 (316Ti)

Welded WX pipes ASTM A312 of 14'' SCH STD in 310S produced in 7 days and than shipped with air freight to Dubai

Welded pipes DIN17457 TC2 / EN10217-7 TC2 DIN EN ISO1127 D3/T3 of 88,9x2 and 812,8 x5mm in 1.4404

Welded pipes ASTM A358 class 1 in 904L with 100% X-ray of the weld as per norm and with special WPS/PQR requirements as per client’s specification

Welded WX pipe ASTM A312 24'' SCH STD in 321H with intergranular corrosion test (ASTM A262 E) and grain size test (ASTM E112)

Seamless fittings ASTM B366 of 4'' till 8'' in incoloy 825(UNS N08825)

Welded WX elbows ASTM A403 60'' SCH STD in 316L

Sanitary butterfly valves, sanitary ball valves unions

Welded WX T-pieces and reducers ASTM A403 36'' SCH STD in duplex S31803

Welded WX stub ends MSS-SP43 type A (short type) 14'' and 18'' SCH10S in 316/316L

Welded WX elbow 45° and 90° LR of DN900 till DN1600 as per DIN2605-1 and DIN2605-2 in 1.4307

Seated valves (Sitzventile) and control valves (Regelventile) for sanitary applications

Seamless elbow 90° LR ASTM/ASME A/SA403 20'' SCH STD in 347H

Welded WX elbow 90° LR ASTM A403, ASME B16.9 48'' SCH20 in 321/321H

Welded WX elbow 90° LR ASTM/ASME A/SA403 64'' SCH XS in 304/304L

Welded WX T-piece of 36'' SCH STD in 304/304L with special WPS/PQR and impact test at -196°C

Internally polished fittings till 32'' with internal rugosity of max. 0,3mµ packed for shipment

Seamless elbow 180° LR ASTM A403 8'' and 5'' SCH XS in 317L

Welded WX bends 90° R=508mm ASTM A403 8'' SCH40S in 316L

Seamless elbow ASTM A335 24'' x 50,8mm in P92

Welded WX elbow DIN2605-2 DN400 till DN1600 in 1.4307

Sanitary butterfly valves, sanitary ball valves and unions

Seamless elbow 180° SR ASTM A403 ASME B16.28 8'' SCH160 in superduplex S32760 with ferrite check 100% ultrasonic testing and 100% dye penetrant testing

Seamless and welded WX fittings in DIN in 1.4307 (304L) and 1.4404 (316L) with EN10204/3.2 inspection and ferrite max. 3% on the weld

Welded WX T-piece of 16’’ SCH120(30,96mm) in 321H

Forged long welding neck flanges in superduplex S32760 (1.4501)

Forged valve bodies in WB36 and rings in 316L

Forged pipes in 1.4435 (316LMo)

Forged petroleum drilling rings in 20SiMn2MoVA

Forged wide electrical axis in 34CrNiMo6

Forged pipe for power station in F11 P11), F22 (P22), F91 (P91) and F92 (P92)

Forged rings in 317L (1.4438)

Long welding neck flanges of 4’’ in 347H (1.4550)

Lap joint flange of 34’’ in P92

Forged nozzle as per drawing in 254SMO (1.4547)

Forged pressure vessel pipe in 316Ti (1.4571)

Forged bushes in 904L (1.4539)

Galvanised flanges ASTMA105N of 14’’ till 24’’

Forged rings with diam 2400mm in 316L

Forged flanges of DN400 in 1.4878 (321H) with 3.2 certificate

Forged lateral T-pieces and heavy duty forged flanges

Forged pipe pieces of 20’’ s=35mm in 304H

Flanges DIN2629 PN320 DN200 in 1.4404

Forged lateral T-piece of 24’’ in duplex F51

Flanges till 28’’ in 316L with dye penetrant testing

Flange ASTM B564 as per drawing DN800 in UNS N08810 (incoloy 800H).

Flange ASTM A182 ASME B16.47 serie B 300 lbs RTJ 44'' in 347H.

Seamless pipe ASTM A312, ASME B36.19 36’’ SCH10 (914,4 x 7,92mm) in 316Ti (1.4571).

Welded WX T-piece of 16’’ SCH120(30,96mm) in 321H with impact test at -196°C (41J), 100% ultrasonic and 100% dye penetrant and EN10204/3.2 inspection (delivery time : 3 weeks with air freight).

Forged pipe / forged bushes as per ASTM A182 in 347.

Forged valve bodies in P92 and WB36.

Welded pipes ASTM A358 class 1 in 904L with special WPS/PQR requirements as per client’s specification.

Seamless and welded WX fittings in DIN in 1.4307 (304L) and 1.4404 (316L) with EN10204/3.2 inspection and ferrite max. 3% on the weld.

Forged nozzle ASTM B564 as per drawing in inconel UNS N06600.

Packing can be in prefumigated boxes as per IPCC

Ultrasonic testing on 24’’ 150 lbs blind flange

Intergranular corrosion testing

Dye penetrant investigation on 36’’ 300 lbs RTJ blind flanges

Microscopic examination (200 x enlarged) on duplex 1.4462 pipes

Tensile testing

Sharpy impact testing

IQI on X-Ray films

Flattening test on test piece of 24’’ seamless pipe

Ultrasonic testing of seamless pipes

Ultrasonic wall thickness measurement

Special heat treatment (stabilizing heat treatment) on elbows of 24” SCH XXS in 321H

PMI results Niton hand gun

PMI with Niton hand gun

PMI with Spectro